Ajax 12V PSU for NVR
The Ajax 12V PSU for NVR is an electronic board that replaces the standard 110/230 V~ power supply inside an Ajax NVR so the recorder can run from a low-voltage DC source, 8–16 V DC. It is meant for properties with unstable or no mains power, and it should be fitted by a professional electrician.
Key features
- Accepts 8–16 V DC input (12.1–16 V DC with the jumper fitted)
- Outputs 12 V DC ± 3%, up to 2 A
- Installs inside the NVR enclosure in place of the bundled power board
- About 10 minutes to fit with a PH1 screwdriver, per Ajax
- Terminal adapter included in the complete set
- Cable cross-section AWG 12–14
Where it fits
Useful on farms, remote or empty properties, construction sites and warehouses, and anywhere load-shedding or an unreliable grid interrupts recording. You supply the low-voltage source, for example a battery-backed 12 V DC supply, and the NVR keeps recording while that source has power.
Works with
- NVR (8-ch)
- NVR (16-ch)
- A low-voltage DC power source supplied separately
Order from Satellite Comms (satcomms.co.za) or call 011 402 1166 for help choosing the right Ajax setup.
- Model: 12V PSU for NVR
- Type: board that replaces the standard 110/230 V~ power supply unit inside the NVR
- Input voltage without jumper: 8–16 V DC (turn-on 8 V, turn-off 6.5 V)
- Input voltage with jumper: 12.1–16 V DC (turn-on 12.1 V, turn-off 10.35 V)
- Maximum input current: up to 4 A (when output current is 2 A)
- Output: 12 V DC ± 3%, maximum 2 A
- Quiescent current consumption: 65 mA; shutdown 110 μA
- Installation: inside the NVR enclosure, replacing the bundled power supply board
- Cable cross-section: AWG 12–14
- Dimensions: 118 × 123 × 17 mm
- Weight: 51 g
- Operating temperature: 0 °C to +40 °C
- Operating humidity: up to 75%
- Protection class: IP20




